## 3-D Solution and Gradient Plots with MATLAB Functions

### Types of 3-D Solution Plots Available in MATLAB

In addition to surface and gradient plots available with the PDE plotting functions, you can use MATLAB^{®} graphics capabilities to create more types of plots for your 3-D model.

Plot on a 2-D slice — To examine the solution on the interior of the geometry, define a 2-D grid that intersects the geometry, and interpolate the solution onto the grid. For examples, see 2-D Slices Through 3-D Geometry and Contour Slices Through 3-D Solution. While these two examples show planar grid slices, you can also slice on a curved grid.

Streamline or quiver plots — Plot the gradient of the solution as streamlines or a quiver. See Plots of Gradients and Streamlines.

You can use any MATLAB plotting command to create 3-D plots. See Techniques for Visualizing Scalar Volume Data and Visualizing Vector Volume Data.

### 2-D Slices Through 3-D Geometry

Open Live Script

This example shows how to obtain plots from 2-D slices through a 3-D geometry.

The problem is

$$\frac{\partial u}{\partial t}-\Delta u=f$$

on a 3-D slab with dimensions 10-by-10-by-1, where $$u=0$$ at time `t = 0`

, boundary conditions are Dirichlet, and

$$f(x,y,z)=1+y+10{z}^{2}$$

**Set Up and Solve the PDE**

Define a function for the nonlinear `f`

coefficient in the syntax as given in f Coefficient for specifyCoefficients.

`function bcMatrix = myfffun(region,state)`

`bcMatrix = 1+10*region.z.^2+region.y;`

Import the geometry and examine the face labels.

model = createpde;g = importGeometry(model,"Plate10x10x1.stl");pdegplot(g,"FaceLabels","on","FaceAlpha",0.5)

The faces are numbered 1 through 6.

Create the coefficients and boundary conditions.

c = 1;a = 0;d = 1;f = @myfffun;specifyCoefficients(model,"m",0,"d",d,"c",c,"a",a,"f",f);applyBoundaryCondition(model,"dirichlet","Face",1:6,"u",0);

Set a zero initial condition.

setInitialConditions(model,0);

Create a mesh with sides no longer than 0.3.

`generateMesh(model,"Hmax",0.3);`

Set times from 0 through 0.2 and solve the PDE.

tlist = 0:0.02:0.2;results = solvepde(model,tlist);

**Plot Slices Through the Solution**

Create a grid of `(x,y,z)`

points, where `x = 5`

, `y`

ranges from 0 through 10, and `z`

ranges from 0 through 1. Interpolate the solution to these grid points and all times.

yy = 0:0.5:10;zz = 0:0.25:1;[YY,ZZ] = meshgrid(yy,zz);XX = 5*ones(size(YY));uintrp = interpolateSolution(results,XX,YY,ZZ,1:length(tlist));

The solution matrix `uintrp`

has 11 columns, one for each time in `tlist`

. Take the interpolated solution for the second column, which corresponds to time 0.02.

usol = uintrp(:,2);

The elements of `usol`

come from interpolating the solution to the `XX`

, `YY`

, and `ZZ`

matrices, which are each 5-by-21, corresponding to `z-by-y`

variables. Reshape `usol`

to the same 5-by-21 size, and make a surface plot of the solution. Also make surface plots corresponding to times 0.06, 0.10, and 0.20.

figureusol = reshape(usol,size(XX));subplot(2,2,1)surf(usol)title("t = 0.02")zlim([0,1.5])xlim([1,21])ylim([1,5])usol = uintrp(:,4);usol = reshape(usol,size(XX));subplot(2,2,2)surf(usol)title("t = 0.06")zlim([0,1.5])xlim([1,21])ylim([1,5])usol = uintrp(:,6);usol = reshape(usol,size(XX));subplot(2,2,3)surf(usol)title("t = 0.10")zlim([0,1.5])xlim([1,21])ylim([1,5])usol = uintrp(:,11);usol = reshape(usol,size(XX));subplot(2,2,4)surf(usol)title("t = 0.20")zlim([0,1.5])xlim([1,21])ylim([1,5])

### Contour Slices Through 3-D Solution

Open Live Script

This example shows how to create contour slices in various directions through a solution in 3-D geometry.

**Set Up and Solve the PDE**

The problem is to solve Poisson's equation with zero Dirichlet boundary conditions for a complicated geometry. Poisson's equation is

$$-\nabla \cdot \nabla u=f.$$

Partial Differential Equation Toolbox™ solves equations in the form

$$-\nabla \cdot \nabla (cu)+au=f.$$

So you can represent the problem by setting $$c=1$$ and $$a=0$$. Arbitrarily set $$f=10$$.

c = 1;a = 0;f = 10;

The first step in solving any 3-D PDE problem is to create a PDE Model. This is a container that holds the number of equations, geometry, mesh, and boundary conditions for your PDE. Create the model, then import the "`ForearmLink.stl"`

file and view the geometry.

N = 1;model = createpde(N);importGeometry(model,"ForearmLink.stl");pdegplot(model,"FaceAlpha",0.5)view(-42,24)

**Specify PDE Coefficients**

Include the PDE coefficients in `model`

.

specifyCoefficients(model,"m",0,"d",0,"c",c,"a",a,"f",f);

Create zero Dirichlet boundary conditions on all faces.

applyBoundaryCondition(model,"dirichlet", ... "Face",1:model.Geometry.NumFaces, ... "u",0);

Create a mesh and solve the PDE.

generateMesh(model);result = solvepde(model);

**Plot the Solution as Contour Slices**

Because the boundary conditions are $$u=0$$ on all faces, the solution $$u$$ is nonzero only in the interior. To examine the interior, take a rectangular grid that covers the geometry with a spacing of one unit in each coordinate direction.

[X,Y,Z] = meshgrid(0:135,0:35,0:61);

For plotting and analysis, create a `PDEResults`

object from the solution. Interpolate the result at every grid point.

V = interpolateSolution(result,X,Y,Z);V = reshape(V,size(X));

Plot contour slices for various values of $$z$$.

figurecolormap jetcontourslice(X,Y,Z,V,[],[],0:5:60)xlabel("x")ylabel("y")zlabel("z")colorbarview(-11,14)axis equal

Plot contour slices for various values of $$y$$.

figurecolormap jetcontourslice(X,Y,Z,V,[],1:6:31,[])xlabel("x")ylabel("y")zlabel("z")colorbarview(-62,34)axis equal

**Save Memory by Evaluating As Needed**

For large problems you can run out of memory when creating a fine 3-D grid. Furthermore, it can be time-consuming to evaluate the solution on a full grid. To save memory and time, evaluate only at the points you plot. You can also use this technique to interpolate to tilted grids, or to other surfaces.

For example, interpolate the solution to a grid on the tilted plane $$0\le x\le 135$$, $$0\le y\le 35$$, and $$z=x/10+y/2$$. Plot both contours and colored surface data. Use a fine grid, with spacing 0.2.

[X,Y] = meshgrid(0:0.2:135,0:0.2:35);Z = X/10 + Y/2;V = interpolateSolution(result,X,Y,Z);V = reshape(V,size(X));figuresubplot(2,1,1)contour(X,Y,V);axis equaltitle("Contour Plot on Tilted Plane")xlabel("x")ylabel("y")colorbarsubplot(2,1,2)surf(X,Y,V,"LineStyle","none");axis equalview(0,90)title("Colored Plot on Tilted Plane")xlabel("x")ylabel("y")colorbar

### Plots of Gradients and Streamlines

Open Live Script

This example shows how to calculate the approximate gradients of a solution, and how to use those gradients in a quiver plot or streamline plot.

The problem is the calculation of the mean exit time of a Brownian particle from a region that contains absorbing (escape) boundaries and reflecting boundaries. For more information, see Narrow escape problem. The PDE is Poisson's equation with constant coefficients. The geometry is a simple rectangular solid. The solution $$u(x,y,z)$$ represents the mean time it takes a particle starting at position $$(x,y,z)$$ to exit the region.

**Import and View the Geometry**

model = createpde;importGeometry(model,"Block.stl");pdegplot(model,"FaceLabels","on","FaceAlpha",0.5)view(-42,24)

**Set Boundary Conditions**

Set faces 1, 2, and 5 to be the places where the particle can escape. On these faces, the solution $$u=0$$. Keep the default reflecting boundary conditions on faces 3, 4, and 6.

applyBoundaryCondition(model,"dirichlet","Face",[1,2,5],"u",0);

**Create PDE Coefficients**

The PDE is

$$-\Delta u=-\nabla \cdot \nabla u=2$$

In Partial Differential Equation Toolbox™ syntax,

$$-\nabla \cdot (c\nabla u)+au=f$$

This equation translates to coefficients `c = 1`

, `a = 0`

, and `f = 2`

. Enter the coefficients.

c = 1;a = 0;f = 2;specifyCoefficients(model,"m",0,"d",0,"c",c,"a",a,"f",f);

**Create Mesh and Solve PDE**

Initialize the mesh.

generateMesh(model);

Solve the PDE.

results = solvepde(model);

**Examine the Solution in a Contour Slice Plot**

Create a grid and interpolate the solution to the grid.

[X,Y,Z] = meshgrid(0:135,0:35,0:61);V = interpolateSolution(results,X,Y,Z);V = reshape(V,size(X));

Create a contour slice plot for five fixed values of the `y`

-coordinate.

figurecolormap jetcontourslice(X,Y,Z,V,[],0:4:16,[])xlabel("x")ylabel("y")zlabel("z")xlim([0,100])ylim([0,20])zlim([0,50])axis equalview(-50,22)colorbar

The particle has the largest mean exit time near the point $$(x,y,z)=(100,0,0)$$.

**Use Gradients for Quiver and Streamline Plots**

Examine the solution in more detail by evaluating the gradient of the solution. Use a rather coarse mesh so that you can see the details on the quiver and streamline plots.

[X,Y,Z] = meshgrid(1:9:99,1:3:20,1:6:50);[gradx,grady,gradz] = evaluateGradient(results,X,Y,Z);

Plot the gradient vectors. First reshape the approximate gradients to the shape of the mesh.

gradx = reshape(gradx,size(X));grady = reshape(grady,size(Y));gradz = reshape(gradz,size(Z));figurequiver3(X,Y,Z,gradx,grady,gradz)axis equalxlabel("x")ylabel("y")zlabel("z")title("Quiver Plot of Estimated Gradient of Solution")

Plot the streamlines of the approximate gradient. Start the streamlines from a sparser set of initial points.

hold on[sx,sy,sz] = meshgrid([1,46],1:6:20,1:12:50);streamline(X,Y,Z,gradx,grady,gradz,sx,sy,sz)title("Quiver Plot with Streamlines")hold off

The streamlines show that small values of `y`

and `z`

give larger mean exit times. They also show that the `x`

-coordinate has a significant effect on `u`

when `x`

is small, but when `x`

is greater than 40, the larger values have little effect on `u`

. Similarly, when `z`

is less than 20, its values have little effect on `u`

.

## MATLAB Command

You clicked a link that corresponds to this MATLAB command:

Run the command by entering it in the MATLAB Command Window. Web browsers do not support MATLAB commands.

Select a Web Site

Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .

You can also select a web site from the following list:

### Americas

- América Latina (Español)
- Canada (English)
- United States (English)

### Europe

- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)

- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- Deutsch
- English
- Français

- United Kingdom (English)

Contact your local office